wiki:Hardware/DetailedSpecs

INGA's detailed hardware specifications

There is no need to populate the whole PCB. Nevertheless, everything we got is described here. A complete list of all parts can be found in the parts-list.

Atmel ATmega 1284P 8-bit RISC MCU == [[Image(...)]]

  • 128 kB Flash, 16 kB RAM, 4 kB EEPROM
  • 16 MHz crystal oscillator
  • JTAG, ISP, I²C, 10-bit-ADC
  • RoHS Compliant

Datasheet: Atmel ATmega 1284P
Manufacturer Link: Atmel ATmega 1284P 8-bit RISC MCU

Atmel AT86RF231 2.4 GHz Radio Transceiver == [[Image(...)]]

  • Exclusively connected to "first" SPI
  • IEEE802.15.4, ZigBee, 6LoWPAN
  • Hardware AES Support
  • RoHS Compliant

Datasheet: Atmel AT86RF231
Manufacturer Link: Atmel AT86RF231 2.4 GHz Radio Transceiver

PCB High-Gain-Antenna == [[Image(...)]]

  • Taken from the Atmel Application Notes.

Application Note: Design and characterization of the Radio Controller Board's 2.4GHz PCB Antenna

Atmel AT45DB161D 16 MBit Flash Memory == [[Image(...)]]

  • Connected to MSPI
  • 512 Bytes Page Size
  • Two Buffers

Datasheet: Atmel AT86RF231
Manufacturer Link: Atmel AT45DB161D 16 MBit Flash Memory

Micro SD-Card Slot

  • Connected to MSPI

FT232R - USB UART == [[Image(...)]]

Also see the Wiki-page FTDI FT232R for further information and known issues.

Datasheet: FTDI FT232R
Manufacturer Link: FTDI FT232R - USB UART IC

Analog Devices ADXL345 Accelerometer

  • Connected to I²C

Datasheet: Analog Devices ADXL345
Manufacturer Link: ADXL345: 3-Axis, ±2 g/±4 g/±8 g/±16 g Digital Accelerometer

ST Microelectronics L3G4200D Gyroscope == [[Image(...)]]

  • Connected to I²C
  • Three selectable full scales (250/500/2000 dps)
  • 16 bit-rate value data output
  • 8-bit temperature data output

Datasheet: ST Microelectronics L3G4200D
Manufacturer Link: L3G4200D

Bosch BMP085 Pressure Sensor == [[Image(...)]]

  • Connected to I²C
  • Pressure range: 300 - 1100 hPa

Datasheet: Bosch BMP085
Manufacturer Link: Bosch MEMS pressure sensors

NXP Semiconductors Xtrinsic MAG3110 Three-Axis, Digital Magnetometer

  • Connected to I²C

Datasheet: NXP MAG3110
Manufacturer Link: NXP Magnetometer

Voltage Sensor == [[Image(...)]]

Current Sensor

Datasheet: MAX4372F
Manufacturer Link: MAX4372F

Voltage Regulation

Datasheet: MAX8881
Manufacturer Link: MAX8881EUT33-T

Battery Charger

Datasheet: MAX1555
Manufacturer Link: MAX1555

Push Button

LEDs

On/Off? Switch

Crystals

16 MHz

32 kHz

Last modified 8 months ago Last modified on 19.03.2019 10:23:30

Attachments (1)

Download all attachments as: .zip